MOTORS FOR SCREW DRIVING APPLICATIONS WITH ACCU-TRK CLUTCH
Products > Pneumatic Motors > MOTORS FOR SCREWDRIVING APPLICATIONS > MOTORS FOR SCREW DRIVING APPLICATIONS WITH ACCU-TRK CLUTCH
MOTORS FOR SCREW DRIVING APPLICATIONS WITH ACCU-TRK CLUTCH
Data measured at pressure of 6 bar - Minimum supply hose diameter: 5 mm
(*) Optional on ATE version: direct starting for Right and reversible motors.
Right rotation | No-load speed | Torque Nm | Clutch spring | Weight | |
---|---|---|---|---|---|
Model | Code | rpm/min | Nm | Kg | |
![]() |
8604251 | 1000 | 1,8 - 3,5 | Orange | 0,8 |
![]() |
8604250 | 1000 | 1,8 - 3,5 | Orange | 0,8 |
Data measured at pressure of 6 bar - Minimum supply hose diameter: 6 mm
(*) Optional on ATE version: direct starting for Right and reversible motors.
Data measured at pressure of 6 bar - Minimum supply hose diameter: 8 mm
(*) With platinum springs and optional cams
(**) Optional on ATE version: direct starting for right and reversible motors.
Data measured at pressure of 6 bar - Minimum supply hose diameter: 10 mm
* = With platinum springs and optional cams
(**) Optional on ATE version: direct starting for Right and reversible motors.
Reversible | No-load speed | Torque Nm | Clutch spring | Weight | |
---|---|---|---|---|---|
Model | Code | rpm/min | Nm | Kg | |
![]() |
8604280 | 900 | 1,8 - 3,5 | Orange | 0,8 |
The left rotation is not controlled by the friction clutch.
On ATE version: direct starting for Right and reversible motors.
The left rotation is not controlled by the friction clutch. On ATE version: direct starting for Right and reversible motors.
Note: the left rotation torque is not controlled by the friction clutch.
On ATE version: direct starting for Right and reversible motors.
Reversible | No-load speed | Torque Nm | Clutch spring | Bush holder | Weight | |
---|---|---|---|---|---|---|
Model | Code | rpm/min | Nm | Kg | ||
![]() |
8604121 | 190 | 20-35 | Silver | 1/2" (3/8") | 2,7 |
![]() |
8604122 | 110 | 40-70 | Gold | 1/2" (3/8") | 3,0 |
Data measured at pressure of 6 bar - Minimum supply hose diameter: 8 mm
On ATE version: direct starting for Right and reversible motors.